BT UC-351GP/E-UK Manual de instalación descargar pdf (Pagina 37)

BT Redcare Secure Issue 16 June 2010

Appendix E Secure IP (Grade 4 only) specification notes

IP Protocol: TCP

Port: 443

Data Usage / Requirements:

Agile IP Grade 4 polling is every 10 seconds a poll and response results in 288 total bytes

transferred (incl IP headers). A small number of alarms will also typically be generated per day

and these result in 296 bytes transferred. Overall his generates approximately 2.5 M Bytes per

day, per site.

Traffic Direction:

Agile IP establishes an outgoing TCP connection from your network to the Redcare Enterprise

Services Platform (ESP). Once this outgoing TCP connection has been established, traffic over

that connection is 2 way.

Additional Protocols:

Only TCP is required from your network.

Port Forwarding:

No ports need to be forwarded in the incoming direction. The outgoing TCP connection connects

to port 443 on the Redcare ESP network, so you would need to allow outgoing access to port 443

if you block that by default.

NAT: Not required:

GPRS Requirements:

You do not need to route GPRS traffic. The GPRS connection from the Agile IP communicator

through to the Redcare ESP and on to the ARC is entirely independent of your network.

DHCP and Static Addressing:

The Agile IP communicators can be configured as either DHCP clients or with specific static IP

addresses on your internal network as you prefer.

1 2 ... 32 33 34 35 36 37 38 39 40

Sin comentarios

BT UC-351GP/E-UK Manual de instalación Pagina 37