BT UC-351GP/E-UK Manual de instalación descargar pdf (Pagina 4)

BT Redcare Secure Issue 16 June 2010

PRODUCT

SECURE 2

SECURE 3

SECURE IP

Both paths working, PSTN/IP path fails – fault reported in

2 MINS

70 SECONDS

Both paths working, Radio path fails – fault reported in

5-55 MINS

3-13 MINS

Only Radio path working and it fails – fault reported in

55 MINS

70 SECONDS

Only PSTN/IP path working and it fails – fault reported in

25 HOURS

5 HOURS

70 SECONDS

If both paths failed simultaneously – fault reported in

55 MINS

13 MINS

Primary Polling Frequency

5 MINS

10 SECONDS

EN GRADE

ATS VALUE PRIMARY

ATS4

ATS5

ATS VALUE SECONDARY

ATS3

ATS4

Figure 2 - Polling rates and communication fail alarm transmission times

Note: The polling rates and communication fail alarm transmission times in Fig 2 may be liable to

change. For the latest information, refer to the Technical information sheet at

http://www.redcare.bt.com/partner/brochure_list.htm

Note: Where the Redcare Secure unit is connected to a PSTN line (Secure 2 & 3) then the line

should be either a dedicated line, or a line of low usage, to ensure that the necessary out going

test calls and alarm calls can be made when required.

1 2 3 4 5 6 7 8 9 ... 39 40

Sin comentarios

BT UC-351GP/E-UK Manual de instalación Pagina 4